
Hygopac process sealing device
Continuous sealing device for the approved sealing of sterilised packaging, like Hygofol.
This is what counts:
- Automatic contact pressure for consistent seal seam quality
- Seam of at least 9 mm, without defects
- Assembly-line principle for fast and economical operation
- According to European standard EN 868
Technical Data | Hygopac |
Voltage (V/~1) | 230 |
Mains frequency (Hz) | 50 – 60 |
Power output (W) | 550 |
Heating performance (W) | 2 × 250 |
Heat-up time (min) | approx. 3 |
Sealing temperature (°C) | up to 240 |
Temperature adjustment | stepless |
Sealing speed (m/min) | 5,3 |
Sealing seam width (mm) | 9 |
Weight (kg) | 7,2 |
Dimensions (H × W × T) | 160 × 435 × 135 |
Time saved in comparison to bar-sealing devices | x |
Operating panel with display | |
Validation | |
Process control (sealing temperature, sealing speed, pressing pressure) | |
Operational qualification | x |
Manufacturer performance qualification | x |
Sealing parameter storage | |
Automatic data storage via SD card or network | |
Optional accessories | |
Instrument table | x |
Roll cutting mechanism | x |
-
Hygopac Handover Protocol
67,59 KB PDF -
Operating instructions Dürr Hygopac
3,00 MB PDF -
Operating Instructions Hygopac Sealcheck
693,56 KB PDF -
Order form Sealing Seam Test Hygopac
780,05 KB PDF -
Product information Hygopac Sealcheck
206,62 KB PDF -
Übergabeprotokoll Hygopac EN
63,13 KB PDF -
Validierung des Verpackungsprozesses DE/EN
100,38 KB PDF